TM-9-2320-440-13-P

TERMINAL HIGH ALTITUDE AREA DEFENSE (THAAD) CARRIER

TECHNICAL MANUAL; OPERATOR’S AND FIELD LEVEL MAINTENANCE MANUAL (INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST)

AUGUST 2010

TM-9-2320-440-13-P - Page 211 of 1616

TM 9-2320-440-13&P

0024-9

0024

NO HIGH IDLE DURING MRP ELEVATION OPERATION OVER 5 DEGREES (CONTINUED)

THAAD0542

WARNING

Remove rings, wristwatches, neck chains, and any other jewelry before working

around vehicle.

Jewelry can catch on equipment and cause serious injury.

Jewelry

and tools may short across electrical circuits and cause damage to equipment or

severe burns or electrical shock to personnel.

Step 12.

Turn engine start switch OFF (

Connect engine harness connector

MC20.

Remove jumperwires from THAAD chassis harness MUJB connector.

Disconnect THAAD chassis harness input module gray connector.

Check for continuity

across THAAD chassis harness wires as indicated in the chart below.

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

Repair damaged THAAD chassis harness wire (TM 9-2320-325-14&P) or

notify Supervisor.

MALFUNCTION

TEST OR INSPECTION

CORRECTIVE ACTION

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

MRP Interlock Function

Wire Number

Input Module Gray

Connector Terminal

MUJB Connector

Terminal

ADU/IL Cable Connected

1901

P1

b

Right Elevation Cylinder Lock

1902

P2

T

Left Elevation Cylinder Lock

1903

P3

R

TM 9-2320-347-10)