TM-9-2320-440-13-P

TERMINAL HIGH ALTITUDE AREA DEFENSE (THAAD) CARRIER

TECHNICAL MANUAL; OPERATOR’S AND FIELD LEVEL MAINTENANCE MANUAL (INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST)

AUGUST 2010

TM-9-2320-440-13-P - Page 202 of 1616

TM 9-2320-440-13&P

0023-8

0023

END OF WORK PACKAGE

LHS NO TRANSIT INDICATOR LIGHT DOES NOT OPERATE (CONTINUED)

THAAD0242

WARNING

Remove rings, wristwatches, neck chains, and any other jewelry before working

around vehicle.

Jewelry can catch on equipment and cause serious injury.

Jewelry

and tools may short across electrical circuits and cause damage to equipment or

severe burns or electrical shock to personnel.

Step 12.

Disconnect THAAD control valve harness connector MC86. Turn engine start switch

ON (

Check for 22 to 28 vdc between wire 1472 at connector

MC86, terminal B and a known good ground.

a.

If 22 to 28 vdc are present, repair wire 1472 (TM 9-2320-325-14&P) or

replace LHS compression frame harness (WP 0069).

b.

If 22 to 28 vdc are not present, repair wire 1472 (TM 9-2320-325-14&P)

or replace THAAD control valve harness (WP 0088).

MALFUNCTION

TEST OR INSPECTION

CORRECTIVE ACTION

TM 9-2320-347-10)