TM-9-2320-440-13-P

TERMINAL HIGH ALTITUDE AREA DEFENSE (THAAD) CARRIER

TECHNICAL MANUAL; OPERATOR’S AND FIELD LEVEL MAINTENANCE MANUAL (INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST)

AUGUST 2010

TM-9-2320-440-13-P - Page 231 of 1616

TM 9-2320-440-13&P

0025-15

0025

RACK LOCKS ENGAGED INDICATOR LIGHT(S) DO NOT OPERATE PROPERLY (CONTINUED)

THAAD0432

WARNING

Remove rings, wristwatches, neck chains, and any other jewelry before working

around vehicle.

Jewelry can catch on equipment and cause serious injury.

Jewelry

and tools may short across electrical circuits and cause damage to equipment or

severe burns or electrical shock to personnel.

Step 21.

Disconnect THAAD compression frame harness right MRP rack lock disengaged

proximity switch connector. Check for continuity across wire 1980 from right MRP rack

lock disengaged proximity switch connector, terminal B to THAAD control valve

harness VIM No. 1, 40 pin connector, terminal 37.

If there is continuity, go to Step 28.

Step 22.

Disconnect THAAD control valve harness THAAD compression frame harness

connector. Check for continuity across wire 1980 from THAAD compression frame

harness connector, terminal A to VIM No. 1, 40 pin connector, terminal 37.

a.

If there is continuity, repair wire 1980 (TM 9-2320-325-14&P) or replace

THAAD control valve harness (WP 0088).

b.

If there is no continuity, repair wire 1980 (TM 9-2320-325-14&P) or

replace THAAD compression frame harness (WP 0087).

MALFUNCTION

TEST OR INSPECTION

CORRECTIVE ACTION