TM-9-2320-440-13-P

TERMINAL HIGH ALTITUDE AREA DEFENSE (THAAD) CARRIER

TECHNICAL MANUAL; OPERATOR’S AND FIELD LEVEL MAINTENANCE MANUAL (INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST)

AUGUST 2010

TM-9-2320-440-13-P - Page 238 of 1616

TM 9-2320-440-13&P

0025-22

0025

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

END OF WORK PACKAGE

RACK LOCKS ENGAGED INDICATOR LIGHT(S) DO NOT OPERATE PROPERLY (CONTINUED)

THAAD0430

WARNING

Remove rings, wristwatches, neck chains, and any other jewelry before working

around vehicle.

Jewelry can catch on equipment and cause serious injury.

Jewelry

and tools may short across electrical circuits and cause damage to equipment or

severe burns or electrical shock to personnel.

Step 33.

Disconnect THAAD control valve harness, THAAD compression frame harness

connector.

Turn engine start switch ON (

Check for 22 to 28 vdc

between wire 1461 at THAAD compression frame harness connector, terminal K and a

known good ground.

If 22 to 28 vdc are present, repair wire 1461 (TM 9-2320-325-14&P) or

replace THAAD compression frame harness (WP 0087).

Step 34.

Disconnect THAAD chassis harness, THAAD control valve harness twelve-terminal

connector.

Turn engine start switch ON (

Check for 22 to 28 vdc

between wire 1461 at twelve-terminal connector, terminal 1 and a known good ground.

a.

If 22 to 28 vdc are present, repair wire 1461 (TM 9-2320-325-14&P) or

replace THAAD control valve harness (WP 0088).

b.

If 22 to 28 vdc is not present, repair THAAD chassis harness wire

1461 (TM 9-2320-325-14&P) or notify Supervisor.

MALFUNCTION

TEST OR INSPECTION

CORRECTIVE ACTION

TM 9-2320-347-10)

TM 9-2320-347-10)