TM-9-2320-440-13-P

TERMINAL HIGH ALTITUDE AREA DEFENSE (THAAD) CARRIER

TECHNICAL MANUAL; OPERATOR’S AND FIELD LEVEL MAINTENANCE MANUAL (INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST)

AUGUST 2010

TM-9-2320-440-13-P - Page 243 of 1616

TM 9-2320-440-13&P

0026-5

0026

WORK LIGHT(S) DO NOT OPERATE (CONTINUED)

THAAD0045

WARNING

Remove rings, wristwatches, neck chains, and any other jewelry before working

around vehicle.

Jewelry can catch on equipment and cause serious injury.

Jewelry

and tools may short across electrical circuits and cause damage to equipment or

severe burns or electrical shocks to personnel.

Step 8.

Remove work light lamp (WP 0091). Check for continuity across work light lamp.

If there is no continuity, replace work light lamp (WP 0091).

Step 9.

Check for continuity across work light internal ground wire from work light lamp to work

light connector, terminal B.

If there is no continuity, repair work light internal ground wire

(TM 9-2320-325-14&P).

Step 10.

Remove work light switch (WP 0091). Check for continuity across work light internal

power wire from work light connector, terminal A to work light switch wire termination.

a.

If there is continuity replace work light switch (WP 0091).

b.

If there is no continuity, repair work light internal power wire

TM 9-2320-325-14&P

MALFUNCTION

TEST OR INSPECTION

CORRECTIVE ACTION