TM 9-2320-440-13&P
0030-16
0030
LHS CAB CONTROL FAILS SELF TEST OR NO VIM HEART BEAT INDICATION (CONTINUED)
THAAD0532
THAAD0533
WARNING
Remove rings, wristwatches, neck chains, and any other jewelry before working
around vehicle.
Jewelry can catch on equipment and cause serious injury.
Jewelry
and tools may short across electrical circuits and cause damage to equipment or
severe burns or electrical shock to personnel.
Step 25.
Remove LHS cab control (WP 0068). Disconnect THAAD chassis harness LHS cab
control connector. Turn engine start switch ON (
Check for 22 to 28
vdc between wire 1461 at LHS cab control connector, terminal A and a known good
ground.
If 22 to 28 vdc are not present, go to Step 29.
Step 26.
Turn engine start switch OFF (
Check for continuity across wire
1435 from THAAD chassis harness LHS cab control connector, terminal B to a known
good ground.
a.
If there is continuity, replace LHS cab control module (WP 0068).
b.
If there is no continuity, repair THAAD chassis harness wire 1435
(TM 9-2320-325-14&P) or notify Supervisor.
MALFUNCTION
TEST OR INSPECTION
CORRECTIVE ACTION
TM 9-2320-347-10)
TM 9-2320-347-10)