TM 9-2320-440-13&P
0030-8
0030
LHS CAB CONTROL FAILS SELF TEST OR NO VIM HEART BEAT INDICATION (CONTINUED)
THAAD0525
WARNING
Remove rings, wristwatches, neck chains, and any other jewelry before working
around vehicle.
Jewelry can catch on equipment and cause serious injury.
Jewelry
and tools may short across electrical circuits and cause damage to equipment or
severe burns or electrical shock to personnel.
NOTE
To locate the THAAD communication harness Y connector for the VIM in question, follow
the three-conductor harness back from the faulted VIM 40 pin connector terminal 21 and
22 to the communication harness Y connector.
Step 13.
Disconnect THAAD control valve harness VIM 40 pin connector (WP 0089) and
THAAD communication harness connectors for VIM where second HEART BEAT
indicator light is not flashing. Check for continuity across (+) J1939 wire from VIM 1, 40
pin connector, terminal 22 to THAAD communication harness connector terminal A.
If there is no continuity, repair (+) J1939 wire (TM 9-2320-325-14&P) or
replace THAAD control valve harness (WP 0088).
Step 14.
Check for continuity across THAAD control valve harness (-) J1939 wire from VIM 2, 40
pin connector, terminal 21 to THAAD communication harness connector terminal B.
If there is no continuity, repair (-) J1939 wire (TM 9-2320-325-14&P) or
replace THAAD control valve harness (WP 0088).
MALFUNCTION
TEST OR INSPECTION
CORRECTIVE ACTION