TM-9-2320-440-13-P

TERMINAL HIGH ALTITUDE AREA DEFENSE (THAAD) CARRIER

TECHNICAL MANUAL; OPERATOR’S AND FIELD LEVEL MAINTENANCE MANUAL (INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST)

AUGUST 2010

TM-9-2320-440-13-P - Page 272 of 1616

TM 9-2320-440-13&P

0029-10

0029

LHS AND MRP DO NOT OPERATE (CONTINUED)

THAAD0552

WARNING

Remove rings, wristwatches, neck chains, and any other jewelry before working

around vehicle. Jewelry can catch on equipment and cause serious injury. Jewelry

and tools may short across electrical circuits and cause damage to equipment or

severe burns or electrical shock to personnel.

Step 16.

Disconnect THAAD control valve harness VIM No. 2, 40 pin connector (WP 0089).

Check for continuity across wire 1462B from VIM No. 2, 40 pin connector, terminal 19 to

connector REC7, terminal 3.

If there is no continuity, repair wire 1462B (TM 9-2320-325-14&P) or replace

THAAD control valve harness (WP 0088), and go to Step 17.

Step 17.

Connect all connectors and install diode REC7. Start engine (

Check if LHS (WP 0011) and ground rod driver (WP 0010) operate.

a.

If LHS and ground rod driver operate, problem corrected.

b.

If LHS and/or ground rod driver do not operate, notify Supervisor.

MALFUNCTION

TEST OR INSPECTION

CORRECTIVE ACTION

TM 9-2320-347-10)