TM-9-2320-440-13-P

TERMINAL HIGH ALTITUDE AREA DEFENSE (THAAD) CARRIER

TECHNICAL MANUAL; OPERATOR’S AND FIELD LEVEL MAINTENANCE MANUAL (INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST)

AUGUST 2010

TM-9-2320-440-13-P - Page 269 of 1616

TM 9-2320-440-13&P

0029-7

0029

LHS AND MRP DO NOT OPERATE (CONTINUED)

THAAD0552A

WARNING

Remove rings, wristwatches, neck chains, and any other jewelry before working

around vehicle.

Jewelry can catch on equipment and cause serious injury.

Jewelry

and tools may short across electrical circuits and cause damage to equipment or

severe burns or electrical shock to personnel.

NOTE

•

Perform Step 13 if no vdc is present on wire 1462A at connector REC7, terminal 2 in

Step 11.

•

Perform Step 14 if no vdc is present on wire 1462B at connector REC7, terminal 3 in

Step 11.

Step 13.

Disconnect THAAD control valve harness VIM No. 1, 40 pin connector (WP 0089).

Check for continuity across wire 1462A from VIM No. 1, 40 pin connector, terminal 19 to

connector REC7, terminal 2.

a.

If there is continuity, replace VIM No. 1 (WP 0089).

b.

If there is no continuity, repair wire 1462A (TM 9-2320-325-14&P) or

replace THAAD control valve harness (WP 0088).

MALFUNCTION

TEST OR INSPECTION

CORRECTIVE ACTION