TM-9-2320-440-13-P

TERMINAL HIGH ALTITUDE AREA DEFENSE (THAAD) CARRIER

TECHNICAL MANUAL; OPERATOR’S AND FIELD LEVEL MAINTENANCE MANUAL (INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST)

AUGUST 2010

TM-9-2320-440-13-P - Page 278 of 1616

TM 9-2320-440-13&P

0030-4

0030

LHS CAB CONTROL FAILS SELF TEST OR NO VIM HEART BEAT INDICATION (CONTINUED)

THAAD0492

WARNING

Remove rings, wristwatches, neck chains, and any other jewelry before working

around vehicle.

Jewelry can catch on equipment and cause serious injury.

Jewelry

and tools may short across electrical circuits and cause damage to equipment or

severe burns or electrical shock to personnel.

Step 5.

Remove LHS cab control (WP 0068). Check if THAAD chassis harness THAAD

communication harness and LHS cab control connectors are tight.

If connectors are loose, reconnect loose THAAD chassis harness connectors.

Step 6.

Disconnect THAAD chassis harness LHS cab control and LHS cab control

communication harness connectors.

Check for continuity across (+) J1939 wire from

LHS cab control connector, terminal D to LHS cab control communication harness

connector, terminal A.

If there is no continuity, repair THAAD chassis harness (+) J1939 wire

(TM 9-2320-325-14&P) or notify Supervisor.

Step 7.

Check for continuity across THAAD chassis harness (-) J1939 wire from LHS cab

control connector, terminal E to LHS cab control communication harness connector

terminal B.

If there is no continuity, repair THAAD chassis harness (-) J1939 wire

(TM 9-2320-325-14&P) or notify Supervisor.

MALFUNCTION

TEST OR INSPECTION

CORRECTIVE ACTION