TM-9-2320-440-13-P

TERMINAL HIGH ALTITUDE AREA DEFENSE (THAAD) CARRIER

TECHNICAL MANUAL; OPERATOR’S AND FIELD LEVEL MAINTENANCE MANUAL (INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST)

AUGUST 2010

TM-9-2320-440-13-P - Page 287 of 1616

TM 9-2320-440-13&P

0030-13

0030

LHS CAB CONTROL FAILS SELF TEST OR NO VIM HEART BEAT INDICATION (CONTINUED)

THAAD0530

WARNING

Remove rings, wristwatches, neck chains, and any other jewelry before working

around vehicle.

Jewelry can catch on equipment and cause serious injury.

Jewelry

and tools may short across electrical circuits and cause damage to equipment or

severe burns or electrical shock to personnel.

NOTE

To locate the THAAD communication harness Y connector for the input module, follow the

three-conductor harness back from the input module gray connector terminals P9 and

P10 to the communication harness Y connector.

Step 20.

Disconnect THAAD chassis harness input module gray connector and THAAD

communication harness input module connector.

Check for no continuity between

(+) J1939 and (-) J1939 wires at input module gray connector, terminals P9 and P10.

If there is continuity, repair THAAD chassis harness J1939 wires

(TM 9-2320-325-14&P) or notify Supervisor.

MALFUNCTION

TEST OR INSPECTION

CORRECTIVE ACTION