TM-9-2320-440-13-P

TERMINAL HIGH ALTITUDE AREA DEFENSE (THAAD) CARRIER

TECHNICAL MANUAL; OPERATOR’S AND FIELD LEVEL MAINTENANCE MANUAL (INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST)

AUGUST 2010

TM-9-2320-440-13-P - Page 279 of 1616

TM 9-2320-440-13&P

0030-5

0030

LHS CAB CONTROL FAILS SELF TEST OR NO VIM HEART BEAT INDICATION (CONTINUED)

THAAD0493

WARNING

Remove rings, wristwatches, neck chains, and any other jewelry before working

around vehicle.

Jewelry can catch on equipment and cause serious injury.

Jewelry

and tools may short across electrical circuits and cause damage to equipment or

severe burns or electrical shock to personnel.

NOTE

To locate the THAAD communication harness going to the LHS cab control, follow the

three-conductor harness back from VIM No. 1, 40 pin connector terminal 19 and 20 to the

communication harness Y connector. The harness is connected to the Y connector

terminal is the harness not connected to the second Y connector at the VIMs.

Step 8.

Disconnect Y connectors from THAAD communication harness between LHS cab

control and VIM No. 1.

Install jumper between terminals A and B in THAAD

communication harness connector at VIM No. 1.

Check for continuity between

terminals A and B in THAAD communication harness connector at LHS cab control.

If there is no continuity, notify Supervisor.

MALFUNCTION

TEST OR INSPECTION

CORRECTIVE ACTION