TM 9-2320-440-13&P
0029-9
0029
THAAD0552A
WARNING
Remove rings, wristwatches, neck chains, and any other jewelry before working
around vehicle.
Jewelry can catch on equipment and cause serious injury.
Jewelry
and tools may short across electrical circuits and cause damage to equipment or
severe burns or electrical shock to personnel.
Step 15.
Disconnect THAAD control valve harness VIM No. 1, 40 pin connector (WP 0089).
Check for continuity across wire 1462A from VIM No. 1, 40 pin connector, terminal 19 to
connector REC7, terminal 2.
If there is no continuity, repair wire 1462A (TM 9-2320-325-14&P) and go to
Step 16, or replace THAAD control valve harness (WP 0088) and go to Step
17.
MALFUNCTION
TEST OR INSPECTION
CORRECTIVE ACTION