TM-9-2320-440-13-P

TERMINAL HIGH ALTITUDE AREA DEFENSE (THAAD) CARRIER

TECHNICAL MANUAL; OPERATOR’S AND FIELD LEVEL MAINTENANCE MANUAL (INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST)

AUGUST 2010

TM-9-2320-440-13-P - Page 306 of 1616

TM 9-2320-440-13&P

0032-6

0032

LHS DOES NOT OPERATE (CONTINUED)

THAAD0467

WARNING

Remove rings, wristwatches, neck chains, and any other jewelry before working

around vehicle.

Jewelry can catch on equipment and cause serious injury.

Jewelry

and tools may short across electrical circuits and cause damage to equipment or

severe burns or electrical shock to personnel.

Step 11.

Disconnect THAAD compression frame harness left elevation cylinder stowed switch

connector.

Check for continuity across wire 1435 from THAAD compression frame

harness left elevation cylinder stowed switch connector, terminal B to a known good

ground.

If there is no continuity, repair wire 1435 (TM 9-2320-325-14&P) or replace

THAAD compression frame harness (WP 0087).

Step 12.

Check for continuity across wire 1964 from THAAD control valve harness VIM No. 2, 40

pin connector, terminal 36 to THAAD compression frame harness left elevation cylinder

stowed switch connector, terminal A.

If there is continuity, replace left elevation cylinder stowed switch (WP 0072).

MALFUNCTION

TEST OR INSPECTION

CORRECTIVE ACTION