TM-9-2320-440-13-P

TERMINAL HIGH ALTITUDE AREA DEFENSE (THAAD) CARRIER

TECHNICAL MANUAL; OPERATOR’S AND FIELD LEVEL MAINTENANCE MANUAL (INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST)

AUGUST 2010

TM-9-2320-440-13-P - Page 313 of 1616

TM 9-2320-440-13&P

0033-3

0033

LHS DOES NOT UNLOAD IN AUTO MODE (CONTINUED)

THAAD0360

WARNING

Remove rings, wristwatches, neck chains, and any other jewelry before working

around vehicle.

Jewelry can catch on equipment and cause serious injury.

Jewelry

and tools may short across electrical circuits and cause damage to equipment or

severe burns or electrical shock to personnel.

Step 3.

Unload LHS in manual mode until LHS hook arm is in the fully raised position

(WP 0016). Shut off engine (

Check LHS hook arm up proximity

switch clearance adjustment (WP 0076).

If required, adjust hook arm up proximity switch (WP 0076).

Step 4.

Disconnect THAAD control valve harness VIM No. 2, 40 pin connector (WP 0089).

Turn engine start switch ON (

Check for 22 to 28 vdc between wire

1466 at VIM No. 2, 40 pin connector, terminal 31 and a known good ground.

If 22 to 28 vdc are present, replace VIM No. 2 (WP 0089).

MALFUNCTION

TEST OR INSPECTION

CORRECTIVE ACTION

TM 9-2320-347-10)

TM 9-2320-347-10)