TM-9-2320-440-13-P

TERMINAL HIGH ALTITUDE AREA DEFENSE (THAAD) CARRIER

TECHNICAL MANUAL; OPERATOR’S AND FIELD LEVEL MAINTENANCE MANUAL (INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST)

AUGUST 2010

TM-9-2320-440-13-P - Page 322 of 1616

TM 9-2320-440-13&P

0034-4

0034

MAIN FRAME DOES NOT LOAD IN MANUAL MODE (CONTINUED)

THAAD0706A

WARNING

Main frame and hook arm combined weight is 2,100 lbs (953 kg).

Main frame must

be raised with a suitable lifting device and supported with two wooden blocks.

Failure to comply may result in serious injury or death to personnel.

Step 5.

Turn engine switch to ON position (engine OFF) (

Turn LHS cab

mode select switch to MAN TRANSIT position (WP 0016). With suitable lifting device,

Soldier A and Soldier B raise main frame and block in two places with wooden

blocks (WP 0132). Turn engine switch to OFF position (

With

suitable lifting device, Soldier A and Soldier B remove rod end of both main frame

cylinders from main frame (WP 0133) and raise rod end of cylinder to clear main frame.

Start engine (

While Soldier A attempts to load main frame using

emergency procedures (WP 0016), Soldier B notes operation of main frame cylinders.

Shut off engine (

a.

If one main frame cylinder does not retract, replace non-retracting main

frame cylinder manifold (WP 0132).

b.

If both main frame cylinders do not retract, notify Supervisor.

MALFUNCTION

TEST OR INSPECTION

CORRECTIVE ACTION

TM 9-2320-347-10)

TM 9-2320-347-10)

TM 9-2320-347-10)

TM 9-2320-347-10)