TM-9-2320-440-13-P

TERMINAL HIGH ALTITUDE AREA DEFENSE (THAAD) CARRIER

TECHNICAL MANUAL; OPERATOR’S AND FIELD LEVEL MAINTENANCE MANUAL (INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST)

AUGUST 2010

TM-9-2320-440-13-P - Page 320 of 1616

TM 9-2320-440-13&P

0034-2

0034

MAIN FRAME DOES NOT LOAD IN MANUAL MODE (CONTINUED)

THAAD0709

Step 2.

Turn engine start switch OFF

Check for continuity across THAAD

control valve harness wire 1435 from connector HV3-A1, terminal 1 to a known good

ground.

a.

If there is no continuity, repair wire 1435 (TM 9-2320-325-14&P) or

replace THAAD control valve harness (WP 0088).

THAAD0656E

Step 3.

Start engine (

Position LHS cab control mode select switch to MAN

MAIN FRAME position (WP 0016). Check if main frame unloads, while depressing and

holding main frame down control valve (WP 0016). Note main frame operation. Turn

PTO switch to OFF position (WP 0011). Shut off engine (

If main frame retracts, replace main frame directional control valve

(WP 0125).

MALFUNCTION

TEST OR INSPECTION

CORRECTIVE ACTION

(TM 9-2320-347-10)

TM 9-2320-347-10)

TM 9-2320-347-10)