TM-9-2320-440-13-P

TERMINAL HIGH ALTITUDE AREA DEFENSE (THAAD) CARRIER

TECHNICAL MANUAL; OPERATOR’S AND FIELD LEVEL MAINTENANCE MANUAL (INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST)

AUGUST 2010

TM-9-2320-440-13-P - Page 518 of 1616

TM 9-2320-440-13&P

0053-2

0053

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

1.

Remove locknut (1), washer (2), washer (3), screw (4), and height control link (5) from height control valve (6).

Discard locknut.

2.

Push down control arm of height control valve (6) to drain air pressure from suspension air springs (7) or pull

up control arm of height control valve (6) to add air pressure to suspension air springs (7) until ride height is

15.30 to 15.92 in. (38.9 to 40.4 cm) measured from center of lower shock absorber mounting screw (8) to

bottom of frame (9).

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

3.

Insert 3/16 in. twist drill (10) through locating hole in control arm of height control valve (6) and corresponding

hole in mounting bracket (11).

4.

Loosen locknut (12) on control arm of height control valve (6). Discard locknut.

THAAD0377

THAAD0376