TM 9-2320-440-13&P
0069-6
0069
INSTALLATION
NOTE
Route LHS compression frame as noted prior to removal.
1.
Install LHS compression frame harness (13) inside vehicle.
2.
Install bulkhead connector (25) on compression frame manifold (31) and connector bracket (30) with four
screws (29) and locknuts (28).
3.
Install nut (27) on bulkhead connector (25) and tighten two screws (26).
4.
Connect connector MC86 (24) to bulkhead connector (25).
5.
Connect connector MC88 (22) to hook arm down proximity switch (23).
THAAD0337
THAAD0336