TM-9-2320-440-13-P

TERMINAL HIGH ALTITUDE AREA DEFENSE (THAAD) CARRIER

TECHNICAL MANUAL; OPERATOR’S AND FIELD LEVEL MAINTENANCE MANUAL (INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST)

AUGUST 2010

TM-9-2320-440-13-P - Page 614 of 1616

TM 9-2320-440-13&P

0072-2

0072

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

NOTE

•

Note number of turns needed to remove cap to ensure proper installation.

•

Note position of locking ring prior to removal to ensure proper installation.

3.

Loosen nut (8) and remove retainer (9), cap (10), nut (11), locking ring (12), washer (13), nut (8), and

switch (14) from switch plate (6).

END OF TASK

INSTALLATION

NOTE

•

Both MRP elevation cylinder stowed switches are installed the same way.

Left side

shown.

•

Install cap according to number of turns as noted prior to removal.

•

Install locking ring as noted prior to removal.

1.

Install switch (14) on switch plate (6) with nut (8), washer (13), locking ring (12), nut (11), cap (10), and

retainer (9). Tighten nuts (8 and 11) to secure switch (14) before mounting switch.

THAAD0136