TM-9-2320-440-13-P

TERMINAL HIGH ALTITUDE AREA DEFENSE (THAAD) CARRIER

TECHNICAL MANUAL; OPERATOR’S AND FIELD LEVEL MAINTENANCE MANUAL (INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST)

AUGUST 2010

TM-9-2320-440-13-P - Page 715 of 1616

TM 9-2320-440-13&P

0093-3/(4 blank)

0093

INSTALLATION

NOTE

Both left and right angled rollers are installed the same way. Left side shown.

1.

Position angled roller (2) in roller assembly (13).

2.

Install endplate (10) on roller assembly (13) with four lockwashers (12) and screws (11).

3.

Install lockplate (9) and bracket (8) on endplate (10) with two lockwashers (7) and screws (6).

4.

Install lube fitting (5) on angled roller (2).

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

5.

Install lockwasher (3) and nut (4) on angled roller (2).

6.

Bend tab of lockwasher (3) into slot of nut (4).

7.

Install lube fitting (1) on angled roller (2).

FOLLOW-ON MAINTENANCE

1.

Lubricate rear rollers (WP 0050).

2.

Remove wheel chocks (

END OF TASK

END OF WORK PACKAGE

THAAD0378

TM 9-2320-347-10)