TM-9-2320-440-13-P
TERMINAL HIGH ALTITUDE AREA DEFENSE (THAAD) CARRIER
TECHNICAL MANUAL; OPERATOR’S AND FIELD LEVEL MAINTENANCE MANUAL (INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST)
AUGUST 2010
TM-9-2320-440-13-P - Page 793 of 1616
TM 9-2320-440-13&P
0106-1
0106
FIELD LEVEL MAINTENANCE
OUTRIGGER ASSEMBLY REPLACEMENT
INITIAL SETUP:
REMOVAL
WARNING
The THAAD hydraulic system operates at oil pressure up to 3,250 psi (22,409 kPa).
Never disconnect any hydraulic line or fitting without first dropping pressure to
zero. Failure to comply may result in serious injury or death to personnel.
NOTE
•
Position drain pan under hydraulic lines and fittings being removed.
•
Tag and mark hydraulic lines prior to removal to ensure proper installation.
•
Cap and plug hydraulic lines upon removal.
•
Remove cable ties as required.
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
- -
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
Tools and Special Tools
Lifting Device, Minimum Capacity 2,100 lbs
(953 kg)
Pan, Drain (WP 0183, Item 10)
Set, Cap and Plug (WP 0183, Item 17)
Tool Kit, General Mechanic’s: Automotive
(WP 0183, Item 25)
Wrench, Torque (WP 0183, Item 31)
Materials/Parts
Locknut, (6), (WP 0184, Item 16)
Oil, Hydraulic (WP 0186, Item 21)
Packing, Preformed, (2), (WP 0184, Item 36)
Packing, Preformed, (1), (WP 0184, Item 121)
Packing, Preformed, (1), (WP 0184, Item 86)
Packing, Preformed, (2), (WP 0184, Item 65)
Tags, Identification (WP 0186, Item 32)
Ties, Cable, Plastic (WP 0186, Item 34)
Personnel Required
MOS 63B Wheeled vehicle mechanic (2)
References
None
Equipment Conditions
Rear marker light removed (WP 0071)
Rear palm button switch removed (WP 0073)
Rear auxiliary work lamp removed (WP 0058)
Rear work lamp switch removed (WP 0090)
Rear data plates removed (WP 0096)
Rear mud flaps removed (WP 0108)
Rear ground cable removed (WP 0063)
Rear composite taillights removed
(TM 9-2320-325-14&P)
Back to Top
