TM-9-2320-440-13-P

TERMINAL HIGH ALTITUDE AREA DEFENSE (THAAD) CARRIER

TECHNICAL MANUAL; OPERATOR’S AND FIELD LEVEL MAINTENANCE MANUAL (INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST)

AUGUST 2010

TM-9-2320-440-13-P - Page 788 of 1616

TM 9-2320-440-13&P

0105-2

0105

-

-

-

-

- .Outrigger pads may have sharp edges. Use care when removing

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

WARNING

Keep hands and feet clear of outriggers during outrigger/stabilizer extension and

retraction. Failure to comply may result in injury or death to personnel.

NOTE

•

Left and right stabilizer (STABILIZER LH and STABILIZER RH) control levers can be

operated independently or at the same time.

•

Stabilizer movement from one lever may be slower than the other when operating two

levers together.

•

Air suspension will automatically deflate when outriggers are deployed.

7.

Push and hold palm button switch (6).

8.

Move OUTRIGGER LH control lever (7) and OUTRIGGER RH control lever (8) to deploy outrigger

approximately 6-10 inches (15.24-25.40 cm).

9.

Move STABILIZER LH control lever (9) and STABILIZER RH control lever (10) to DOWN position to lower

outrigger stabilizer cylinder rods. Deploy stabilizers approximately 10 in. (25.40 cm).

10. Release palm button switch (6).

11.

.Turn hydraulic selector switch (5) to OFF position.

12. Move PTO ENGAGED switch (3) to OFF position. Indicator light (4) should extinguish.

13. Shut off engine (

THAAD0314

TM 9-2320-347-10)