TM 9-2320-440-13&P
0104-2
0104
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
NOTE
Solenoid shafts should remain in extended position after being pulled out.
5.
Cut and remove two safety wires (6) securing two solenoid shafts (7 and 8).
6.
Pull out two solenoid shafts (7 and 8) approximately 0.13 in. (3.3 mm) and turn counterclockwise one quarter
turn.
7.
Push and hold palm button switch (9).
WARNING
When operating deck elevation cylinders, personnel must stay clear of cylinder.
Failure to comply may result in serious injury or death to personnel.
NOTE
Cylinder head must be extended approximately 7.5 in. (191 mm).
8.
Use lever (10) and extend cylinder head (11).
9.
Shut off engine (
THAAD0517
TM 9-2320-347-10)