TM-9-2320-440-13-P

TERMINAL HIGH ALTITUDE AREA DEFENSE (THAAD) CARRIER

TECHNICAL MANUAL; OPERATOR’S AND FIELD LEVEL MAINTENANCE MANUAL (INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST)

AUGUST 2010

TM-9-2320-440-13-P - Page 785 of 1616

TM 9-2320-440-13&P

0104-3

0104

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

10. Remove five screws (12), lockwashers (13), and wear pad (14) from bracket (15). Discard lockwashers.

END OF TASK

INSTALLATION

NOTE

All wear pads are installed the same way.

Left side shown.

1.

Install wear pad (14) on bracket (15) with five lockwashers (13) and screws (12).

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

2.

Start engine (

3.

Apply service brake pedal (1) and set transmission range selector (2) to N (neutral).

4.

Put PTO ENGAGE switch (3) in ON position. Make sure indicator light (4) illuminates.

5.

Move hydraulic selector switch (5) to MRP position.

THAAD0310

THAAD0516

TM 9-2320-347-10)