TM-9-2320-440-13-P
TERMINAL HIGH ALTITUDE AREA DEFENSE (THAAD) CARRIER
TECHNICAL MANUAL; OPERATOR’S AND FIELD LEVEL MAINTENANCE MANUAL (INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST)
AUGUST 2010
TM-9-2320-440-13-P - Page 839 of 1616
TM 9-2320-440-13&P
0115-3/(4 blank)
0115
NOTE
•
Both fuel level sending units are installed the same way.
Right side shown.
•
Install cable ties as required.
1.
Coat both sides of gasket (9) with sealing compound.
2.
Slide gasket (9) over float (10), and install gasket (9) on fuel level sending unit (4).
NOTE
Aline holes in fuel level sending unit with holes in fuel tank.
3.
Install fuel level sending unit (4) on fuel tank (8) with four screws (7).
4.
Install wire 1435 (6) on fuel level sending unit (4) with screw (5).
5.
Install wire (3) on fuel level sending unit (4) with lockwasher (2) and nut (1).
END OF TASK
FOLLOW-ON MAINTENANCE
1.
Install left isolator stop bracket (WP 0100).
2.
Connect batteries (TM 9-2320-325-14&P).
3.
Check operation of fuel level sending unit (
4.
Remove wheel chocks (
END OF TASK
END OF WORK PACKAGE
TM 9-2320-347-10)
TM 9-2320-347-10)
Back to Top
