TM-9-2330-202-13-P
TRAILER, CARGO, 3/4-TON, 2-WHEEL: M101A1, M101A2 AND M101A3; TRAILER, CHASSIS, 3/4-TON, 2-WHEEL: M116A1 AND M116A2; TRAILER, CHASSIS, 1-TON, 2-WHEEL: M116A3
TECHNICAL MANUAL; OPERATOR AND FIELD MAINTENANCE MANUAL INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST
DECEMBER 2011
TM-9-2330-202-13-P - Page 35 of 552
REFERENCE INFORMATION - Continued
VDC
Volts, Direct Current
W/
With
W/O
Without
QUALITY ASSURANCE
No specific quality assurance manual pertains to the M101 or M116 Series of trailers.
Defective material received through the supply system should be reported on an SF Form 368. Instructions for
preparing the reports are provided in AR 702-7, Product Quality Deficiency Report Program (DLAR 4155.24;
SECNAVINST 4855.5A; AFR 74-6). Mail your completed form directly to:
Commander
U.S. Army Tank-automotive and Armaments Command
ATTN: AMSTA-TR-E/MPA
Warren, MI 48397-5000
WARRANTY INFORMATION
The M101 and M116 Series trailers are not warranted.
SAFETY, CARE AND HANDLING
For information on general safety precautions and regulations, review the warning summary at the front of this manual
preceding the table of contents. Observe all WARNINGs and CAUTIONs that appear in the maintenance procedures.
CORROSION PREVENTION AND CONTROL
Corrosion prevention and control (CPC) of Army materiel is a continuing concern. It is important that any corrosion
problem with this item be reported so the problem can be corrected and improvements can be made to prevent the
problem in future items.
While corrosion is typically associated with the rusting of metals, it can also include deterioration of other materials,
such as rubber and plastic. Unusual cracking, softening, swelling, or breaking of these materials may be a
corrosion problem.
If a corrosion problem is identified, it can be reported using an SF Form 368. The use of key words, such as
"corrosion,""rust," "deterioration," and "cracking," will ensure that the information is identified as a CPC problem. The
form should be submitted to the address specified in DA PAM 750-8.
END OF WORK PACKAGE
TM 9-2330-202-13&P
0001
0001-3/4 blank
Back to Top
