TM 9-2330-247-14&P
4-52.
REFLECTORS (Con’t)
ACTION
LOCATION
ITEM
REMARKS
INSTALLATION
3.
Reflector (4)
Put in place.
4.
Reflector (4)
Two screws (5),
Screw in and tighten using no. 2 cross-tip screw-
and frame (3)
Iockwashers (2),
driver and adjustable wrench.
and nut (1)
TASK ENDS HERE
4-53.
DATA PLATES
This
a.
Task Covers:
Removal
b.
Installation
Initial Setup:
Tool/Test Equipment:
l Screwdriver, cross-tip, no. 2
l Wrench, adjustable
ACTION
LOCATION
ITEM
REMARKS
NOTE
All data plates are replaced in the same way, except for quantity of mounting hardware,
which varies, This task is for one; repeat for the others.
4-129