TM-9-2330-324-14-P

TRAILER, CARGO: 1-1/2-TON, 2-WHEEL, M105A3

TECHNICAL MANUAL; OPERATOR’S, ORGANIZATIONAL, DIRECT SUPPORT, AND GENERAL SUPPORT MAINTENANCE MANUAL (INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST)

JULY 2002

TM-9-2330-324-14-P - Page 140 of 350

TM 9-2330-324-14&P

0028 00-2

CHASSIS WIRING HARNESS REPLACEMENT—Continued

0028 00

REMOVAL

1.

Remove nut (1), lockwasher (2), screw (4), and clamp (3) from intervehicular cable assembly (5).

Discard lockwasher.

2.

Pull back chassis wiring harness (6) until plug connectors (7) are exposed.

3.

Tag wires for installation if identification bands are missing or not legible (WP 0030 00).

4.

Disconnect six plug connectors (8).

5.

Remove 11 nuts (1), lockwashers (2), screws (4), clamps (3), and chassis wiring harness (6). Discard

lockwashers.

6.

Remove four grommets (7).

8

6

6

4

3

1

2

5

5

4

1

2

3

7

7

INSPECTION

1.

Inspect for cracks, breaks, or other damage.

2.

Replace defective parts.

INSTALLATION

1.

Install four grommets (7).

2.

Position chassis wiring harness (6) and install 11 clamps (3), screws (4), new lockwashers (2), and

nuts (1).