TM 9-2330-324-14&P
0028 00-3/(4 blank)
CHASSIS WIRING HARNESS REPLACEMENT—Continued
0028 00
INSTALLATION—Continued
3.
Connect six plug connectors (8) to intervehicular cable assembly (5).
4.
Remove tags if used.
5.
Pull forward intervehicular cable assembly (5) until plug connectors (8) are inside frame and there is
60 ± 0.5 in. (152 ± 1 cm) of cable exposed from main plug on end to point where cable is clamped.
6.
Install clamp (3), screw (4), new lockwasher (2), and nut (1) on intervehicular cable assembly (5).
8
6
6
4
3
1
2
5
5
4
1
2
3
7
7
FOLLOW-ON TASKS
1.
Install composite lights (WP 0026 00).
2.
Connect running lights (WP 0027 00).
3.
Connect intervehicular cable assembly to towing vehicle (page 0007 00-5).
4.
Check operation of lights.
END OF TASK