TM-9-2330-324-14-P

TRAILER, CARGO: 1-1/2-TON, 2-WHEEL, M105A3

TECHNICAL MANUAL; OPERATOR’S, ORGANIZATIONAL, DIRECT SUPPORT, AND GENERAL SUPPORT MAINTENANCE MANUAL (INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST)

JULY 2002

TM-9-2330-324-14-P - Page 145 of 350

TM 9-2330-324-14&P

0029 00-3/(4 blank)

INTERVEHICULAR CABLE ASSEMBLY REPLACEMENT—Continued

0029 00

INSTALLATION

1.

Slide intervehicular cable assembly (2) inside frame from front until plug connectors (12) are

exposed.

2.

Connect six plug connectors (12) to chassis wiring harness (11).

3.

Remove tags if used.

4.

Pull forward intervehicular cable assembly (2) until plug connectors (12) are inside frame and there is

60 ± 0.5 in. (152 ± 1 cm) of cable exposed from main plug on end to point where cable is clamped.

5.

Install ground wire (8), clamp (9), screw (10), new lockwasher (7), and nut (6).

6.

Install clamp (3), screw (1), new lockwasher (4), and nut (5) on intervehicular cable assembly (2).

12

1

5

11

2

2

7

8

11

4

3

2

6

9

10

FOLLOW-ON TASKS

1.

Connect intervehicular cable assembly to towing vehicle (page 0007 00-5).

2.

Check operation of lights.

END OF TASK