TM-9-2330-324-14-P

TRAILER, CARGO: 1-1/2-TON, 2-WHEEL, M105A3

TECHNICAL MANUAL; OPERATOR’S, ORGANIZATIONAL, DIRECT SUPPORT, AND GENERAL SUPPORT MAINTENANCE MANUAL (INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST)

JULY 2002

TM-9-2330-324-14-P - Page 154 of 350

TM 9-2330-324-14&P

0032 00-4

HANDBRAKE LINKAGE AND CABLES MAINTENANCE—Continued

0032 00

REMOVAL—Continued

10.

Disconnect handbrake cable assembly (19) from brake lever (30).

11.

Loosen two nuts (32) from guide bracket (33) and backing plate (31).

12.

Remove handbrake cable assembly (19).

13.

Inspect cable assembly (19) for cracks, breaks, or damage.

14.

Replace defective parts.

15.

Repeat steps 10 through 14 for other side.

31

30

19

32

31

33

19

INSTALLATION

WARNING

If trailer is not coupled to towing vehicle, ensure that landing gear is

lowered and locked. Failure to follow this warning may cause trailer to

roll, resulting in injury to personnel or damage to equipment.

1.

Insert handbrake cable assembly (19) through guide bracket (33) and backing plate (31).

2.

Tighten two nuts (32).

3.

Connect handbrake cable assembly (19) to brake lever (30).

4.

Repeat steps 1 through 3 for other side.