TM 9-2330-324-14&P
0032 00-6
HANDBRAKE LINKAGE AND CABLES MAINTENANCE—Continued
0032 00
INSTALLATION—Continued
9.
Repeat steps 5 through 8 for other side.
10.
Install shaft assembly (8), six flatwashers (17), screws (18), flatwashers (16), new lockwashers (15),
and nuts (14).
11.
Install clevis pin (6) and new cotter pin (7).
12.
Repeat step 11 for other side.
13.
Install rod (12), nut (11), yoke (10), clevis pin (9), and new cotter pin (13). Yoke should be installed 1
in. (25.4 mm) onto end of rod.
9
10
12
11
14
15
16
17
18
13
6
7
8