TM-9-2330-324-14-P

TRAILER, CARGO: 1-1/2-TON, 2-WHEEL, M105A3

TECHNICAL MANUAL; OPERATOR’S, ORGANIZATIONAL, DIRECT SUPPORT, AND GENERAL SUPPORT MAINTENANCE MANUAL (INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST)

JULY 2002

TM-9-2330-324-14-P - Page 160 of 350

TM 9-2330-324-14&P

0033 00-2

SERVICE BRAKE ASSEMBLY MAINTENANCE—Continued

0033 00

DISASSEMBLY—Continued

NOTE

If replacing brakeshoes (8 and 17) only, perform steps 1 through 5.

1.

Remove two springs (1) from pins (6, 18, 23, and 29).

2.

Disconnect handbrake cable (24) from brake lever (5).

3.

Remove two slotted washers (2), flatwashers (3), spring washers (4), brake lever (5), and link (7) from

pins (6 and 23).

4.

Remove screw (30), lockwasher (31), flatwasher (32), sleeve (33), and brakeshoe (8) from backing

plate (11). Discard lockwasher.

5.

Remove nut (20), lockwasher (19), flatwasher (21), sleeve (22), bolt (14), and brakeshoe (17) from

backing plate (11). Discard lockwasher.

6.

Remove 12 nuts (15), lockwashers (16), bolts (26), cable ramp (25), two supports (12), and backing

plate (11) from axle (13). Discard lockwashers.

7.

Remove brake adjusting screw (28) and slack adjusting wheel (27) from each support (12).

8.

Remove four nuts (10) and lockwashers (9) from pins (6, 18, 23, and 29). Remove pins from

brakeshoes (8 and 17). Discard lockwashers.

7

6

8

9

10

30

31

32

33

29

1

28

27

26

25

12

12

11

13

14

15

16

24

20

19

18

17

22

21

23

1

4

2

3

5