TM-9-2330-324-14-P

TRAILER, CARGO: 1-1/2-TON, 2-WHEEL, M105A3

TECHNICAL MANUAL; OPERATOR’S, ORGANIZATIONAL, DIRECT SUPPORT, AND GENERAL SUPPORT MAINTENANCE MANUAL (INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST)

JULY 2002

TM-9-2330-324-14-P - Page 166 of 350

TM 9-2330-324-14&P

0034 00-2

BRAKE ACTUATOR REPLACEMENT—Continued

0034 00

REMOVAL—Continued

3.

Remove four screws (13), lockwashers (12), flatwashers (11), two breakaway locks (14), gasket (10),

and breakaway lever (15) with breakaway chain (16) attached. Discard lockwashers, breakaway locks,

gasket, and breakaway lever.

4.

Remove bolt (19), lockwasher (18), and cable holder (17).

5.

Remove cotter pin (20), nut (21), flatwasher (22), screw (8), flatwasher (9), and brake actuator (1).

Discard cotter pin and brake actuator.

8

22

9

11

12

13

14

15

17

20

21

10

1

16

18

19

CLEANING

Clean area under brake actuator.

INSTALLATION

NOTE

A suitable container should be used to catch any draining brake fluid.

Ensure that all spills are cleaned up.

1.

Install new brake actuator (1), flatwasher (9), screw (8), flatwasher (22), nut (21), and new cotter pin

(20).

2.

Install cable holder (17), new lockwasher (18), and bolt (19).

3.

Install new breakaway lever (15) with breakaway cable (16) attached, new gasket (10), two new

breakaway locks (14), four flatwashers (11), new lockwashers (12), and screws (13).