TM-9-2330-324-14-P

TRAILER, CARGO: 1-1/2-TON, 2-WHEEL, M105A3

TECHNICAL MANUAL; OPERATOR’S, ORGANIZATIONAL, DIRECT SUPPORT, AND GENERAL SUPPORT MAINTENANCE MANUAL (INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST)

JULY 2002

TM-9-2330-324-14-P - Page 137 of 350

TM 9-2330-324-14&P

0027 00-3/(4 blank)

RUNNING LIGHT MAINTENANCE—Continued

0027 00

RUNNING LIGHT INSTALLATION

NOTE

All running lights are installed the same way. This procedure covers one

running light.

1.

Install gasket (4) or new gasket if old one was discarded, running light base (5), four screws (6), new

lockwashers (7), and nuts (8).

2.

Install bulb (3), lens (1), and two screws (2).

3.

Connect plug connector (9).

9

8

6

7

3

1

2

5

4

FOLLOW-ON TASKS

1.

Connect intervehicular cable assembly to towing vehicle (page 0007 00-5).

2.

Check operation of light.

END OF TASK