TM-9-2330-324-14-P

TRAILER, CARGO: 1-1/2-TON, 2-WHEEL, M105A3

TECHNICAL MANUAL; OPERATOR’S, ORGANIZATIONAL, DIRECT SUPPORT, AND GENERAL SUPPORT MAINTENANCE MANUAL (INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST)

JULY 2002

TM-9-2330-324-14-P - Page 194 of 350

TM 9-2330-324-14&P

0041 00-2

DRAWBAR COUPLER REPLACEMENT—Continued

0041 00

INSTALLATION

WARNING

Ensure that landing gear is lowered and locked and wheels are securely

chocked. Failure to follow this warning may cause trailer to roll, resulting

in injury to personnel or damage to equipment.

NOTE

Torque each nut (4) to 20 lb-ft (27.1 N•m) and then tighten to next hole

for cotter pin (3).

Install drawbar coupler (5), eight (as necessary) flatwashers (2), two screws (1), nuts (4), and new cotter

pins (3).

1

5

3

2

4

END OF TASK