TM 9-2330-334-13&P
FLATRACK RAIL AND PIVOT BRACKETS REPLACEMENT
0089 00
- CONTINUED
0089 00-9/10 Blank
INSTALLATION - Continued
NOTE
All four retaining pins are installed the same way.
One is shown.
10.
Install retaining pin (2) in flatrack rail (3) with two cotter pins (1).
11.
Perform previous step on remaining retaining pins.
OPERATIONAL CHECKS
1.
Install flatrack air chambers and locks (WP 0107 00).
2.
Install shuttle (WP 0100 00).
3.
Perform flatrack loading and unloading procedures (WP 0043 13 and WP 0043 14, TM 9-2320-392-
10-1).
END OF WORK PACKAGE