TM-9-2330-334-13-P

FAMILY OF MEDIUM TACTICAL VEHICLES (FMTV) LOAD HANDLING SYSTEM TRAILER (LHST) M1147A1

TECHNICAL MANUAL; OPERATOR AND FIELD LEVEL MAINTENANCE MANUAL INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST (RPSTL)

DECEMBER 2013

CHANGE 1

TM-9-2330-334-13-P - Page 738 of 1184

TM 9-2330-334-13&P

DRAWBAR REPLACEMENT - Continued

0090 00

Change 1

0090 00-6

INSTALLATION – Continued

NOTE

•

LH and RH drawbar hinges are installed the same way. RH drawbar hinge shown.

•

Line up flat spot on taper pin with flat spot on drawbar hinge bracket.

4.

Position taper pin (9) on drawbar hinge bracket (12) and drawbar (3).

5.

Position four washers (15), bolt (16), and nut (17) on taper pin (9).

6.

Tighten nut (17) until the head of the taper pin (9) is flush with the drawbar hinge bracket (12).

7.

Remove nut (17), bolt (16), and four washers (15) from taper pin (9). Discard nut, bolt, and

washers.