TM 9-2330-334-13&P
DRAWBAR REPLACEMENT - Continued
0090 00
0090 00-3
Change 1
REMOVAL - Continued
NOTE
LH and RH drawbar hinges are removed the same way. RH drawbar hinge shown.
3.
Remove self-locking nut (5), washer (6), bolt (7), and washer (8) from taper pin (9). Discard self-
locking nut.
4.
Remove two self-locking nuts (10) and bolts (11) from drawbar hinge bracket (12). Discard self-locking
nuts.
5.
Remove taper pin (9) from drawbar (3) and drawbar hinge bracket (12).
6.
Perform the previous three steps on LH drawbar hinge.