TM-9-2330-334-13-P
FAMILY OF MEDIUM TACTICAL VEHICLES (FMTV) LOAD HANDLING SYSTEM TRAILER (LHST) M1147A1
TECHNICAL MANUAL; OPERATOR AND FIELD LEVEL MAINTENANCE MANUAL INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST (RPSTL)
DECEMBER 2013
CHANGE 1
TM-9-2330-334-13-P - Page 737 of 1184
TM 9-2330-334-13&P
DRAWBAR REPLACEMENT - Continued
0090 00
0090 00-5
Change 1
INSTALLATION
WARNING
Drawbar weighs approximately 215 lbs (97 kgs). Attach a suitable lifting device
prior to installation. Failure to comply may result in injury to personnel or
damage to equipment.
CAUTION
•
Drawbar hinge bushing openings are tapered to fit taper pins. Be sure to install
bushings with wider opening towards the inside of the drawbar. Failure to comply
may result in damage to equipment.
•
Line up slots on drawbar hinge flanges with slots on drawbar hinge brackets. Failure
to comply may result in damage to equipment.
1.
Install two drawbar hinge bushings (14) on drawbar (3).
2.
Install two flanges (13) on drawbar hinge brackets (12).
NOTE
The following step requires the aid of an assistant.
3.
Position drawbar (3) on two drawbar hinge brackets (12).
Back to Top
