0045-3
TM 9-2330-335-14&P
0045
DISASSEMBLY
00045
CAUTION
Take care in separating locator block and bayonet to prevent loss of springs and balls.
1.
Remove setscrew (Figure 2, Item 1), spring (Figure 2, Item 2), and ball (Figure 2, Item 3).
2.
Separate locator block (Figure 2, Item 4) and bayonet (Figure 2, Item 5).
3.
Remove ball (Figure 2, Item 6) and spring (Figure 2, Item 7).
Figure 2.
Upper Assembly.
045
4.
Remove and discard pin (Figure 3, Item 1).
5.
Remove handle (Figure 3, Item 2) from base cap (Figure 3, Item 3).
Figure 3.
Lower Assembly.
045
END OF TASK
447-0264
447-0265