0046-1
TM 9-2330-335-14&P
0046
ORGANIZATIONAL MAINTENANCE
-
RETRACTABLE TWIST LOCKS REPLACEMENT (M871A2R)
Removal, Installation
NOTE
•
Ensure retractable twist lock pocket is clean and free of debris.
•
Item 8 (socket) is welded in. This task is accomplished at Direct Support maintenance.
•
There are four retractable twist locks and they are removed and installed the same way. This
procedure covers one retractable twist lock.
•
See WP 0023 for additional service requirements.
INITIAL SETUP
Maintenance Level
0
Organizational
0
Tools and Special Tools
0
Tool kit, general mechanic’s (Item 4, WP 0082)
0
Materials/Parts
0
Oil, lubricating (Item 11, WP 0085)
0
Pin (8)
0
References
0
WP 0023
0
Equipment Conditions
0
Landing legs down
0
Semitrailer disconnected from prime mover
0
Tires chocked
0
Ground boards emplaced
0
4