TM 9-2330-335-14&P
0047-4
0047
INSTALLATION
00047
NOTE
The OEM hole (Figure 4, Item D) in the recessed mounting plate toward the inside of the side rail is
not used.
Install tiedown ring (Figure 4, Item 2), strap (Figure 4, Item 3), two screws (Figure 4, Item 1), and new locknuts
(Figure 4, Item 5). Tighten locknuts to 20 to 28 lb-ft (27 to 38 Nm).
Figure 4.
Tiedown Rings.
047
END OF TASK
FOLLOW-ON TASKS
00047
1.
Connect semitrailer to prime mover.
2.
Raise landing legs.
3.
Remove/store chocks and ground boards.
END OF TASK
END OF WORK PACKAGE
447-0209