TM-9-2330-335-14-P
SEMITRAILER, TACTICAL, BREAKBULK/CONTAINER TRANSPORTER, 22-1/2 TON, RESET M871R, M871A1R AND M871A2R
TECHNICAL MANUAL; FIELD AND SUSTAINMENT MAINTENANCE MANUAL (INCLUDES REPAIR PARTS AND SPECIAL TOOLS LIST)
SEPTEMBER 2008
TM-9-2330-335-14-P - Page 243 of 640
0047-3
TM 9-2330-335-14&P
0047
MODIFICATION
00047
NOTE
There are different configurations of the tiedown rings. Check that the strap bolt holes align with
the holes in the recessed mounting plate. If the holes do not align, a hole will have to be drilled as
shown in
Modification
in this work package. If the holes align, proceed to
Installation
in this
work package.
1.
Align new hole center to the centerline of the existing holes (Figure 2, Item A).
2.
Locate new hole center 1-1/2 in. (38 mm) on the recessed mounting plate toward the outside of the side rail (Figure 2, Item B).
Figure 2.
Location of Hole to be Drilled.
047
3.
Drill 7/16 in. (11 mm) hole (Figure 3, Item C) in the recessed mounting plate.
Figure 3.
Drilling New Hole.
047
END OF TASK
447-0207
447-0208
Back to Top
