TM-9-2330-335-14-P
SEMITRAILER, TACTICAL, BREAKBULK/CONTAINER TRANSPORTER, 22-1/2 TON, RESET M871R, M871A1R AND M871A2R
TECHNICAL MANUAL; FIELD AND SUSTAINMENT MAINTENANCE MANUAL (INCLUDES REPAIR PARTS AND SPECIAL TOOLS LIST)
SEPTEMBER 2008
TM-9-2330-335-14-P - Page 229 of 640
0044-1
TM 9-2330-335-14&P
0044
ORGANIZATIONAL MAINTENANCE
-
DOCK BUMPERS REPLACEMENT (M871A2R)
Removal, Installation
WARNING
Chock tires to prevent semitrailer movement. Failure to do so could result in injury to personnel.
NOTE
There are two dock bumpers and they are removed and installed the same way. This procedure
covers one dock bumper.
REMOVAL
00044
Remove four locknuts (Figure 1, Item 1), bolts (Figure 1, Item 4), washers (Figure 1, Item 3), and bumper (Figure 1, Item 2).
Discard locknuts.
Figure 1.
Dock Bumper.
044
END OF TASK
INITIAL SETUP
Maintenance Level
0
Organizational
0
Tools and Special Tools
0
Tool kit, general mechanic’s (Item 4, WP 0082)
0
Materials/Parts
0
Locknut (8)
0
Equipment Conditions
0
Landing legs down
0
Semitrailer disconnected from prime mover
0
Tires chocked
0
Ground boards emplaced
0
447-0071
2
Back to Top
