TM-9-2330-335-14-P
SEMITRAILER, TACTICAL, BREAKBULK/CONTAINER TRANSPORTER, 22-1/2 TON, RESET M871R, M871A1R AND M871A2R
TECHNICAL MANUAL; FIELD AND SUSTAINMENT MAINTENANCE MANUAL (INCLUDES REPAIR PARTS AND SPECIAL TOOLS LIST)
SEPTEMBER 2008
TM-9-2330-335-14-P - Page 285 of 640
0060-1
TM 9-2330-335-14&P
0060
ORGANIZATIONAL MAINTENANCE
-
REFLECTORS REPLACEMENT
Removal, Installation
REMOVAL
00060
NOTE
There are four amber reflectors and four red reflectors and they are all removed and installed the
same way. This procedure covers one reflector.
Remove self-tapping screw (Figure 1, Item 2) and amber or red reflector (Figure 1, Item 1) from semitrailer. Discard self-
tapping screw.
Figure 1.
Reflectors.
060
END OF TASK
INSTALLATION
00060
Apply antiseize compound to new self-tapping screw (Figure 1, Item 2) and install amber or red reflector
(Figure 1, Item 1).
END OF TASK
INITIAL SETUP
Maintenance Level
0
Organizational
0
Tools and Special Tools
0
Tool kit, general mechanic’s (Item 4, WP 0082)
0
Materials/Parts
0
Antiseize compound (Item 1, WP 0085)
0
Self-tapping screw (8)
0
Equipment Conditions
0
Landing legs down
0
Semitrailer disconnected from prime mover
0
Tires chocked
0
Ground boards emplaced
0
447-0082
2
Back to Top
