0062-1
TM 9-2330-335-14&P
0062
ORGANIZATIONAL MAINTENANCE
-
ABS WARNING LIGHT REPLACEMENT
Removal, Installation
WARNING
Disconnect electrical power source before performing any maintenance on the electrical system.
Failure to comply could result in injury to personnel.
REMOVAL
00062
1.
Remove grommet (Figure 1, Item 2) from ABS warning light (Figure 1, Item 1). Discard grommet.
2.
Disconnect connectors from back of ABS warning light (Figure 1, Item 1) and remove ABS warning light
(Figure 1, Item 1) from semitrailer.
Figure 1.
ABS Warning Light.
062
END OF TASK
INITIAL SETUP
Maintenance Level
0
Organizational
0
Tools and Special Tools
0
Tool kit, general mechanic’s (Item 4, WP 0082)
0
Materials/Parts
0
Grease, dielectric (silicone) (Item 7, WP 0085)
0
Grommet
0
Equipment Conditions
0
Landing legs down
0
Semitrailer disconnected from prime mover
0
Tires chocked
0
Ground boards emplaced
0
447-0083
2