TM-9-2330-335-14-P
SEMITRAILER, TACTICAL, BREAKBULK/CONTAINER TRANSPORTER, 22-1/2 TON, RESET M871R, M871A1R AND M871A2R
TECHNICAL MANUAL; FIELD AND SUSTAINMENT MAINTENANCE MANUAL (INCLUDES REPAIR PARTS AND SPECIAL TOOLS LIST)
SEPTEMBER 2008
TM-9-2330-335-14-P - Page 302 of 640
TM 9-2330-335-14&P
0066-2
0066
PREPARATION OF EQUIPMENT FOR ADMINISTRATIVE STORAGE
00066
Storage Site
00066
1.
Select the best available site for administrative storage. Separate stored equipment from equipment in use.
Conspicuously mark the area “ADMINISTRATIVE STORAGE.”
2.
Covered space is preferred. When sufficient covered space for all items to be stored is not available, priority should be
given to items which are most susceptible to deterioration from the elements. SB 740-98-1 should be used as a guide for
establishing which items are most susceptible to deterioration.
3.
Open sites should be improved hardstand, if possible. Unimproved sites should be firm, well-drained, and kept free of
excessive vegetation.
Storage Plan
00066
1.
Store equipment so as to provide maximum protection from the elements and to provide access for inspection,
maintenance, and exercising. Anticipate removal or deployment problems and take suitable precautions.
2.
Take into account environmental conditions, such as extreme heat or cold, high humidity, blowing sand or loose debris,
soft ground, mud, and heavy snow, and take adequate precautions.
3.
Establish a fire plan and provide for adequate fire fighting equipment and personnel.
Maintenance Services and Inspection
00066
1.
Prior to storage, perform the next scheduled Organizational PMCS (WP 0016).
2.
Inspect and approve the equipment prior to storage. Do not place equipment in storage in a nonmission capable condition.
3.
Lubricate equipment in accordance with applicable lubrication instructions located in WP 0067.
END OF TASK
BII AND AAL ITEMS
00066
1.
Process BII and AAL items simultaneously with the major item to which they are assigned.
2.
If possible, store BII and AAL items with the major item.
3.
If stored apart from the major item, mark BII and AAL items with tags indicating the major item, its registration or serial
number, and location, and store in protective-type closures. In addition, place a tag or list indicating the location of the
removed items in a conspicuous place on the major item.
END OF TASK
CORRECTION OF SHORTCOMINGS AND DEFICIENCIES
00066
Correct all shortcomings and deficiencies prior to storage, or obtain a waiver from the approving authority.
END OF TASK
GENERAL CLEANING, PAINTING, AND PRESERVATION
00066
CAUTION
Do not direct water or steam, under pressure, against electrical wires or any exterior opening.
Failure to follow this caution may result in damage to equipment.
1.
Clean all equipment of dirt, grease, and other contaminants in accordance with applicable provisions of this
manual. Do not use vapor degreasing. Remove foreign objects that are wedged in tire treads.
Back to Top
