TM-9-2330-335-14-P
SEMITRAILER, TACTICAL, BREAKBULK/CONTAINER TRANSPORTER, 22-1/2 TON, RESET M871R, M871A1R AND M871A2R
TECHNICAL MANUAL; FIELD AND SUSTAINMENT MAINTENANCE MANUAL (INCLUDES REPAIR PARTS AND SPECIAL TOOLS LIST)
SEPTEMBER 2008
TM-9-2330-335-14-P - Page 297 of 640
0064-1
TM 9-2330-335-14&P
0064
ORGANIZATIONAL MAINTENANCE
-
CONSPICUITY TAPE REPLACEMENT
Removal, Installation
REMOVAL
00064
Remove conspicuity tape (Figure 1 or 2, Item 1, 2, or 3) from semitrailer as necessary. Discard conspicuity tape.
Figure 1.
Conspicuity Tape (Sides and Rear).
064
END OF TASK
INSTALLATION
00064
NOTE
•
Make sure surface area to be taped is clean and dry.
•
There are two widths of rolled conspicuity tape. Be certain to apply appropriate conspicuity tape
only to the locations indicated below.
1.
Apply 2 in. (5.1 cm) red/white conspicuity tape (Figure 1, Item 2) to both sides of semitrailer as shown.
2.
Apply 1-1/2 in. (3.8 cm) red/white conspicuity tape (Figure 1, Item 1) along full width of semitrailer rear.
3.
Apply 1-1/2 in. (3.8 cm) red/white conspicuity tape (Figure 1, Item 1) along full width of rear bumper.
INITIAL SETUP
Maintenance Level
0
Organizational
0
Tools and Special Tools
0
Tool kit, general mechanic’s (Item 4, WP 0082)
0
Materials/Parts
0
Tape, conspicuity (A/R)
0
Equipment Conditions
0
Landing legs down
0
Semitrailer disconnected from prime mover
0
Tires chocked
0
Ground boards emplaced
0
447-0018
2
Back to Top
